Supmersible Construction Dewatering Pumps

Supmersible Construction Dewatering Pumps

 

  • Portable Dewatering Pumps
  • Dewatering Pumps
  • High-Head Dewatering Pumps
  • Slurry Pumps
  • Portable Residue Dewatering Pumps
  • Seawater-Resistant Pumps
  • Pumps for High Temperature Liquids
  • Pump for Sewage Bypass

 

Three Phase Pumps

 

KRS Series

KRS_SeriesPumps

The cast iron construction of our KRS series extends pump life by preventing premature wear and failure from the abrasive materials found in mining, aggregate, and construction applications. Available in a variety of discharge sizes and horsepower, the KRS pumps are engineered to withstand even the most rigorous situations.

KTZ Series Pumps features

 

KRS Series Features

Discharge sizes from 3-14 inches and horsepower ranges from 3-50 hp.

4 pole, 1800 rpm motors reduce impeller tip speed and extend parts wear life.

Rugged cast iron construction holds up to the most aggressive mining, aggregate, construction applications.

Dual Silicon Carbide Mechanical seals in a separate oil bath.

 

Performance Range

KRS SERIES Performance Range

 

Model Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
KRS1022 10 30 4-1800 208/230/460/575 20 1/2 49 15/16 990
KRS1230 12 40 4-1800 208/230/460/575 26 3/8 55 1/4 1540
KRS1437 14 50 4-1800 208/230/460/575 26 3/8 55 1/4 1650
KRS2-8S 8 15 4-1800 208/230/460/575 18 9/16 32 1/16 383
KRS2-A3 3 3 4-1800 208/230/460/575 13 3/8 23 5/8 159
KRS2-A4 4 5 4-1800 208/230/460/575 13 3/4 26 15/16 194
KRS2-A6 6 10 4-1800 208/230/460/575 16 5/16 26 15/16 286
KRS2-B3 3 5 4-1800 208/230/460/575 13 3/4 26 15/16 196
KRS2-B4 4 7.5 4-1800 208/230/460/575 13 3/4 26 9/16 209
KRS2-B6 6 15 4-1800 208/230/460/575 16 5/16 29 3/16 330
KRS815 8 20 4-1800 208/230/460/575 18 15/16 37 3/8 520
KRS819 8 25 4-1800 208/230/460/575 22 1/2 45 1/2 850
KRS822 8 30 4-1800 208/230/460/575 22 1/2 45 1/2 860
KRS822L 8 30 4-1800 208/230/460/575 22 1/2 45 1/2 860

 

GPN Series

GPN Series

Tsurumi Agitator Pump GPN Series pumps are ideal for slurry, quarry and gravel pit drainage. Abrasive resistant metals and slow tip speed offer long wear life. Water cooling jacket around the motor allows pump to remain cool even in low water pumping conditions.

 

GPN Series Pumps featuresGPN Series Features

Discharge sizes from 3-6 inches and horsepower ranges from 7.5-30 hp.

4 pole, 1800 rpm motors.

Lower impeller tip speeds extend parts wear life 2-3 times.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Hardened high chrome impeller and agitator.

 

Performance Range

GPN SERIES Performance Range

 

Model Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
GPN35.5 3 7.5 4-1800 208/220/460/575 19 3/16 30 9/16 319
GPN411 4 15 4-1800 208/220/460/575 24 5/16 33 7/8 478
GPN415 4 22 4-1800 208/220/460/575 24 5/16 33 7/8 485
GPN622 6 30 4-1800 460/575 28 9/16 43 3/8 910

 

 

KTD Series

KRS_SeriesPumps

Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the KTZ Series as the base. An agitator is provided to assist smooth suction of the pumping fluid. The side-flow, top-discharge design keeps the motor cooling even if the pump is operated continuously with its motor exposed in air, and it makes the pump easier to place in a confined space.

KTD Series Pumps featuresKTD Series Features

Discharge sizes from 2-3 inches and horsepower ranges from 2.7-4 hp.

2 pole, 3600 rpm motors.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Suitable for transferring or draining bentonite slurry used for slurry drilling, draining slurry mixed water in civil engineering works or foundation works.

 

Performance Range

KTD SERIES Performance Range

 

Model Discharge Size (in.) Motor Output (HP) Pole Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
KTD22.0 2 2.7 2-3600 208/230/460/575 9 1/4 23 3/16 86
KTD33.0 3 4 2-3600 208/230/460/575 11 11/16 25 3/4 145

Three Phase Portables

KTZ Series

KTZ_SeriesPumps.

KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering. Versatility is increased as each pump model has the capability of easily converting between high head and high volume performance with a simple change of the impeller and wear plate.

 

KTZ Series Pumps featuresKTZ Series Features

Discharge sizes from 2-6 inches and horsepower range from 2-15 hp.

Utilizes 2-pole, 3600 rpm motors to achieve higher heads.

High pressure rated mechanical seals are isolated to provide superior motor protection.

Rugged cast iron construction.

Pressure relief ports and exclusive oil lifter extend mechanical seal life, eliminating premature wear and failure in high head operations.

Internal thermal motor protection.

Anti-wicking cable entrance.

 

 

Performance Range

KTZ SERIES Performance Range

 

Model Discharge Bore (in.) Motor Output (HP) Shipping Weight (lbs.) Cable Length (ft.) Diameter (in.) Height (in.)
KTZ21.5-60 2 2 64 50 9 1/4 21 9/16
KTZ22.2-60 2 3 70 50 9 1/4 22 3/8
KTZ23.7-60 2 5 121 50 11 1/8 24 5/8
KTZ32.2-60 3 3 70 50 9 1/4 22 3/8
KTZ33.7-60 3 5 121 50 11 1/8 24 5/8
KTZ35.5-60 3 7.5 145 50 12 1/16 25 11/16
KTZ411-60 4 15 286 50 14 11/16 28 11/16
KTZ43.7-60 4 5 121 50 11 1/8 24 5/8
KTZ45.5-60 4 7.5 145 50 12 1/16 25 11/16
KTZ47.5-60 4 10 205 50 13 26
KTZ611-60 4/6 15 286 50 14 11/16 28 11/16
KTZ67.5-60 4/6 10 205 50 13 26

 

Single Phase Pumps

LB Series

LB Series

Top discharge provides maximum motor cooling while allowing continuous duty operation.

Available in single-phase or three-phase. Pumps fit into 8-inch pipes.

 

LB(T)-1500LB Series Features LB(T)-1500:

High chrome semi-open impeller resists wear for adhesive particles.

Diode motor protectors prevent stator damage in high amperage or run-dry situations.

Up to 70′ shut off head

Slimline design allows pumps to fit into 8″ pipes.

 

 

LB-800LB Series Features LB-800:

Designed to fit an 8″ pipe.

Up to 60′ shut off head.

Available in 110V and 220V single-phase with 50 foot cables.

Double Inside Mechanical Seal With SiC faces provides the longest operational life.

Oil Lifter provides lubrication of the
seal faces.

 

OPTIONAL ACCESSORIES
Float Switch for automatic operation
TS-302 for 110V, TS-303 for 220V.

 

LB-480LB Series Features LB-480:
Urethane Semi Vortex Impeller and elastomer lined pump casing for maximum wear life.

OPTIONAL ACCESSORIES
TS-301 Float Switch for
automatic operation.

 

 

 

LB-480ALB Series Features LB-480A:
Our advanced EL-1 Relay unit mounted on the side of the pump, eliminates the need for float switches. These sensitive electrodes detect water, turning the pump on and off automatically.

 

 


LBT-800LB Series Features

LBT-800:
Three-phase pumps complete with double mechanical SIC seals, oil lifters, and durable lightweight materials found in our similar single-phase products. Available in 230 or 460 voltages.

 

Performance Range

LB SERIES Performance Range

 

Model Discharge Size (in.) Motor Output (HP) Voltage (V) Cable Length (ft.) Diameter (in.) Height (in.) Weight (lbs.)
LB-1500 3 2 110V or 220V 50 7 3/8 23 5/16 72
LB-480 2 2/3 110V 32 7 3/8 11 1/4 28
LB-480A 2 2/3 110V 32 8 3/4 11 1/4 30
LB-800 2 1 115V or 230V 50 7 3/8 13 7/16 35
LB-800A 2 1 115 or 230 50 8 3/4 23 5/16 38
LBT-1500 2 or 3 2 230 or 460 or 575V 50 7 3/8 23 5/16 85
LBT-800 2 1 230 or 460 or 575V 50 7 3/8 13 7/16 35

 

PT SARANA MUTU MANDIRI is positioning themselves as a major player in selling and distributing “construction equipment”. We are chosen by a trusted brand WACKER NEUSON to be their official dealer in Indonesia

Our engineers are there to support the after sales service.

Your satisfaction is our accomplishment

 

SERVICES
As a faithful company, we “PT SARANA MUTU MANDIRI” will ensure that all of the equipment are in a good condition / well installed. PT SARANA MUTU MANDIRI will always be committed to our after sales service.

We do understand that construction project is schedule restricted, hence all of the equipment need to be serviced and maintained at all times. We will not let any delay for any customers concerns. Understanding where the service begins and ends is critical to all of our customers.

Please do not hesitate to contact us any time for your service or maintenance purposes.

Contact Info

OFFICE
Ruko Citra 7, Extension Blok A 08/10. Jakarta Barat. Indonesia
WAREHOUSE
Jl Joglo Raya No 79. Jakarta Barat. Indonesia
PHONE
(021) 2568 4565
WEBSITE
EMAIL
info@saranamutu.co.id